DRT printer guide

BAMBU LAB · DRT

Find my printer

Tell us what you want to make. We’ll narrow down the available configurations.

Checking current configurations and prices…
← Back to Bambu Lab

BAMBU LAB

Bambu Lab E1 Air Purifier

$199.00 USD

Free shipping

    Check availability

    Bambu support from DRT

    Choose the right setup

    Start your first print

    Business & education

    Help along the way

    Product details

    Overview

    Capture 3D-printing exhaust at the printer chamber with the Bambu Lab E1 Air Purifier. Choose the connection kit that matches your printer and rear panel.

    • Three-stage filtration
    • Quiet Mode as low as 38 dB
    • Model-specific connection options
    Bambu Lab E1 Air Purifier — features

    Compatibility and setup

    For 3D-printing exhaust only; do not use the E1 for laser fume extraction. H3C, H2S, H2D and P2S support Auto and Manual modes after the required firmware update. Other listed enclosed printers operate in Manual Mode until compatible firmware is available. Printer-specific adapter pieces may need to be downloaded and 3D printed.

    In the Box
    • Bambu Lab E1 Air Purifier
    • Air hose
    • Power cord
    • 6-pin cable
    • External exhaust adapter
    • Hose adapter
    • Sealing ring

    Select the connection version for your printer. Download and print any additional model-specific adapter pieces required by the installation guide.

    E1 Air Purifier package contents
    Specifications
    Filtration Pre-filter, HEPA layer and activated carbon
    Manufacturer-rated particle filtration Up to 99.97% at 0.3 μm
    Noise As low as 38 dB in Quiet Mode
    Dimensions 261 × 182 × 345.5 mm
    Weight 3.1 kg
    Housing ABS
    Hose PP; 60 mm inner diameter / 70 mm outer diameter

    Frequently asked questions

    Which P2S version should I choose?

    Match both your printer configuration (P2S Only or P2SC) and its original or updated rear panel to the option shown. Use the installation guide to identify your panel before ordering.

    Does every listed printer support automatic control?

    No. The source lists H3C, H2S, H2D and P2S for Auto and Manual modes after a firmware update. Other enclosed printers initially use Manual Mode.

    Can I use the E1 with a laser?

    No. Bambu specifies the E1 for exhaust generated during 3D printing, not laser fume extraction.

    Does filtration replace room ventilation?

    No. Follow the installation and ventilation guidance. The E1 cannot filter carbon monoxide or radon and is not emergency safety equipment.

    Product resources

    Bambu Lab E1 Air Purifier$199.00