Keep your essentials connected
Plan backup for the fridge, lighting, internet and the circuits that matter to your household. Larger loads need an electrical assessment.
Need help choosing a configuration?
Explore the E10 solutionANKER SOLIX AT DRT
Anker SOLIX E10 + Power Dock
Choose your connection, then your capacity. See exactly what is included before adding the system to your cart.
$7,799.00 USD
View this product configuration
A SYSTEM BUILT AROUND YOUR HOME
Plan for the outage. Live for everything else.
Keep the essentials in your routine, choose how backup starts, and build the battery capacity you need. DRT brings the compatible system options into one place.
6.144kWhper B6000 battery
7,680Wcontinuous output per module
120V / 240Vsplit-phase AC output
Choose how backup takes over
Use Smart Inlet Box for a manual setup, or Power Dock for automatic switching after installation.
Add energy as your needs grow
Start with 6.144kWh per battery. Add compatible B6000 batteries for more stored energy, with up to five per power module.
ONE SYSTEM. CLEAR ROLES.
The power module runs it. The batteries keep it going.
Stored energy, home connection and recharging each do a different job. Start with the equipment your home needs, then add only what helps.
E10 power module
Delivers AC power to supported loads and manages charging. Output power determines what can run at the same time.
B6000 battery
Stores 6,144Wh per battery. More batteries extend estimated runtime; they do not replace an appropriate home connection.
Home connection
Smart Inlet Box supports manual backup. Power Dock adds automatic switching. Choose one path for your installation.
Optional recharging
Compatible solar or the Smart Generator 5500 can replenish the battery. Equipment, siting and electrical design are selected separately.
DRT RECOMMENDED STARTING POINTS
Three ways to make E10 yours.
Choose your home connection first. Each starting kit below includes one power module and one B6000 battery; add capacity when you configure.
01 / Existing connection
Starter system
For a home with compatible transfer equipment already in place, or a separately planned standalone setup.
- 1 E10 power module + 1 B6000 battery
- Home connection equipment not included
Why DRT pairs it this way
A focused starting point: invest in storage first when your connection hardware has already been verified.
From $4,299.00 USD
Configure this kit02 / Smart Inlet Box
Manual home backup
For homeowners who want a dedicated home connection and are comfortable switching to backup manually.
- 1 E10 power module + 1 B6000 battery
- Smart Inlet Box included
Why DRT pairs it this way
E10 supplies the energy; Smart Inlet Box handles the manual connection. A clear pairing for a planned backup routine.
From $4,599.00 USD
Configure this kit03 / Power Dock
Automatic home backup
For homeowners who want backup to switch automatically when the grid goes down.
- 1 E10 power module + 1 B6000 battery
- Power Dock included
Why DRT pairs it this way
E10 stores the energy; Power Dock manages the transfer. A useful starting point when automatic backup is the priority.
From $5,799.00 USD
Configure this kitHardware pricing before tax and shipping. Installation, site work and solar panels are separate. A licensed electrician must verify your home and selected loads.
START WITH YOUR POWER NEEDS
More battery. More time.
Explore how battery capacity and average power use affect backup time. Use your measured average load for a more useful estimate.
Choose a configuration20.9hours of estimated backup12.288 kWh nominal battery capacity
Enter a load from 100 to 7,680 watts.
Planning estimate = battery count × 6,144Wh × 85% ÷ average watts. Assumes full batteries and no recharging. Actual runtime varies with temperature, battery condition and inverter use. Startup demand and circuit limits require a separate check. This calculator covers one power module with 1–5 batteries.
FROM SELECTION TO SETUP
A clear plan before power-up.
Choose your loads
List your essential circuits, large appliances and preferred backup duration. Share the list with DRT for product selection.
Confirm the connection
Have a licensed electrician verify panel compatibility, transfer equipment, cable routes, placement and required permits.
Install and commission
Arrange professional installation and system testing. Installation services and site work are not included in the hardware price.
Good questions. Clear answers.
How is E10 different from a portable power station?
E10 is a modular home energy system. A power module, B6000 batteries and suitable connection equipment work together for installed home backup. It is selected around household circuits and installation requirements, rather than only the devices you can plug into a portable station.
Does every kit automatically back up my home?
No. Automatic transfer requires the Power Dock configuration and a compatible, professionally installed setup. Smart Inlet Box is the manual option. A Starter system does not include either device.
Can it run my air conditioner or the entire home?
That depends on running watts, startup demand, the selected configuration and your electrical installation. One power module provides 7,680W continuous output. The 10,000W Turbo rating requires at least two batteries and is time-limited (up to 90 minutes at 86°F / 30°C under stated conditions). It is not the continuous rating.
Do I need solar panels or a generator?
They are optional recharging options. Begin with the battery capacity and connection your home needs. Solar array design and generator connections must meet Anker requirements; fuel generators must operate outdoors according to their safety instructions.
What is included in the price?
The selected hardware configuration and any optional items you add. Installation, permits, electrical upgrades and site work are separate. Review the included equipment and cart summary before checkout.
What warranty applies?
Anker lists 5 years for the E10 power module; B6000 is covered for 5 years or 15MWh of throughput, whichever comes first. Power Dock and Smart Inlet Box carry 10 years, and Smart Generator 5500 carries 3 years, subject to the applicable warranty terms. Read Anker E10 warranty terms
Anker SOLIX E10
Technical details
| Output Rated Voltage | 120 / 240 VAC (Split Phase) |
|---|---|
| Output Rated Frequency | 60Hz |
| Maximum Continuous Output Power / Current (With Battery) | 7,680W, 32A |
| Turbo Backup Output Power / Current (With two Batteries) | 10,000W, 41.6A (90 Minutes) |
| LRA Equivalent Ability | 120A (1 Inverter, 1 Battery) 155A (1 Inverter, 2+ Batteries) 275A (2+ Inverters, 2+ Batteries Each) |
| AC Input Port Recharging | 1,800W, 120V / 15A * 7,680W, 240V / 32A |
| AC Input Port Bypass | 9,600W, 240V / 40A |
| PV (Solar) Input | 2x 4,500W, 30 to 450V(DC), 15A(Imp) |
| DC Generator Input | 4,500W |
| Enclosure Type | NEMA TYPE 4 (IP66) |
| Operating Temperature | -4 °F to 131 °F (-20~55°C) |
| Connectivity | Wi-Fi, Bluetooth |
| Dimensions (W x H x D) | 26.4" x 11.8" x 10.2" (670 x 300 x 260 mm) |
| Weight | 60.6lb (27.5kg) |